Alicool banner

Ford Intercoolers

Performance Race Cars, Kit Cars And Classic Cars.

Alicool intercoolers are all pressure tested and carry a minimum 12-month Warranty, all units are hand crafted by a fully experienced fabrication department. Welding is carried out by coded TIG welders, quality procedures are in place before unit is dispatched as customer satisfaction is our main priority.

If you do not see the product you are looking for please contact us as many units are not listed on our web site.

Ford Intercooler



Ford Escort Cosworth 500 Spec Intercooler

Lightweight 50mm high performance alloy core, will keep After Cooler Temperatures below 40% in race and road applications even in high ambient conditions. Alicool Intercooler cores are vacuum braised in a controlled atmosphere to comply with ISO9001 quality assurance standards.

All prices exclude VAT and delivery
Part No: EC500I

Polished Aluminium Finish £385.00

Powder Coated Black £20.00

View Basket

Ford Intercooler



Ford Escort MK1/2 YB Kit (Radiator,Intercooler,twin fans,cap,switch)

An all in one easy fit solution when fitting a Cosworth turbo engine in a MK1/2 Escort. Intercooler: Lightweight 60mm motorsport high performance core capable of cooling up to 650bhp. Radiator: Lightweight high performance 45mm water core comfortably cools 650bhp.

All prices exclude VAT and delivery
Part No: EYB

Polished Aluminium Finish £682.00

Powder Coated Black £20.00

View Basket

Ford Intercooler



Ford Fiesta Ecoboost 100ps, 125ps, 140ps and 1.0 Ecoboost Intercooler

This product is available to buy online. If you need technical information or an in depth product description please contact our team before purchasing

All prices exclude VAT and delivery
Part No: FEBMI

Polished Aluminium Finish £385.00

Powder Coated Black £20.00

View Basket

Ford Intercooler



Ford Fiesta MK6 & ST150 Intercooler

This product is available to buy online. If you need technical information or an in depth product description please contact our team before purchasing

All prices exclude VAT and delivery
Part No: ST150I

Polished Aluminium Finish £374.00

Powder Coated Black £20.00

View Basket

Ford Intercooler



Ford Fiesta ST180 MK7 Intercooler

This Intercooler went through several different designs until we found this square tube internal high flow fin design. It deliveries extreme heat rejection with virtually no pressure drop. When tested against the cheaper bar and plate designs currently being sold in to the Ford market place on the third and fourth Dyno run this cooler was over 40% more efficient. Testing showed on a chipped car with intake temperatures of around 140 degrees centigrade this cooler dropped the temperatures consistently to below 35 degrees centigrade.

All prices exclude VAT and delivery
Part No: ST180I

Polished Aluminium Finish £385.00

Powder Coated Black £20.00

View Basket

Ford Intercooler



Fiesta ST180 4OOC Intercooler

When designing an Intercooler that the dealers request be capable of keeping a 400 bhp Fiesta in the low 30 degree after cooler temperature you have to make sure your core design is state of the art, this square tube internal fin lightweight design allows for massive amounts of heat to be rejected into the airflow with virtual no pressure drop. The lightweight none bar and plate design gives us a recovery rate not matched by any other Ford intercooler sold on the market. This intercooler is a direct fit to existing pipework.

All prices exclude VAT and delivery
Part No: 400C

Polished Aluminium Finish £429.00

Powder Coated Black £20.00

View Basket

Ford Intercooler



Ford Focus 1.6 Zetec Eco-boost Intercooler

This cooler fills the front of the car and features an air scoop. We tested competitor intercoolers and found while the bar and plate design gave reasonable cooling the pressure drop was over 2psi across the core. We then decided on a low pressure drop core design giving lower than 0.5 loss across core, the added bonus on testing was even over 500 bhp the highest temp was 36 degrees. As usual this Alicool product has the high quality weld finish our customers are now used to and is easily noticeable when compared to other popular Ford intercooler producers products.

All prices exclude VAT and delivery
Part No: FEB16I

Polished Aluminium Finish £385.00

Powder Coated Black £20.00

View Basket

Ford Intercooler



Ford Focus RS MK2 Intercooler (supplied with fitted duct)

This Intercooler went through several different designs until we found this low pressure drop, high flow fin design. It deliveries extreme heat rejection with virtually no pressure drop. This cooler gives extreme performance figures on cars from 300-650bhp When tested against the cheaper bar and plate designs currently being sold in to the Ford market place it proved to be around 30% more efficient. This intercooler features a front air scoop and comes complete with brackets and bolts required to fit.

All prices exclude VAT and delivery
Part No: RS2I

Polished Aluminium Finish £423.00

Powder Coated Black £20.00

View Basket

Ford Intercooler



Ford Focus ST MK2 225 Intercooler

This Intercooler went through several different designs until we found this internal high flow fin design. It deliveries extreme heat rejection with virtually no pressure drop. When tested against the cheaper bar and plate designs currently being sold in to the Ford market place on the third and fourth Dyno run this cooler was over 35% more efficient. Testing showed on a chipped car with intake temperatures of around 140 degrees centigrade this cooler dropped the temperatures consistently to below 20 degrees centigrade. Alicool putting the quality back in to Ford.

All prices exclude VAT and delivery
Part No: ST225I

Polished Aluminium Finish £368.00

Powder Coated Black £20.00

View Basket

Ford Intercooler



Ford Focus ST MK3 Intercooler (supplied with fitted duct)

Comes complete with fitted duct and brackets and bolts to fit. On extensive testing this Intercooler even after multiple runs will hold an after cooler temperature of between 35-40 degrees centigrade while thanks to the specially designed interior fin offering virtually no boost loss.Alicool Intercooler cores are vacuum braised in a controlled atmosphere to comply with ISO9001 quality assurance standards.

All prices exclude VAT and delivery
Part No: ST3I

Polished Aluminium Finish £549.00

Powder Coated Black £20.00

View Basket

Ford Intercooler



Ford Kuga 2.5T intercooler

This cooler fills the front of the MK1 2.5T and features a lightweight high performance internally finned core, which deliveries extreme heat rejection with virtually no pressure drop.

All prices exclude VAT and delivery
Part No: FK25I

Polished Aluminium Finish £418.00

Powder Coated Black £20.00

View Basket

Ford Intercooler



Ford Mondeo MK4 2.0/2.2 Diesel Front Mount Intercooler

Lightweight 60mm high performance alloy core, fully louvered external fin with fitted low pressure drop internal fin. Over 40% more efficient recovery rate than bar and plate coolers. Alicool Intercooler cores are vacuum braised in a controlled atmosphere to comply with ISO9001 quality assurance standards.

All prices exclude VAT and delivery
Part No: MMK4I

Polished Aluminium Finish £418.00

Powder Coated Black £20.00

View Basket

Ford Intercooler



Ford Sierra Cosworth 500 Spec Intercooler

Lightweight 60mm high performance alloy core, will keep After Cooler Temperatures below 40% in race and road applications even in high ambient conditions. Alicool Intercooler cores are vacuum braised in a controlled atmosphere to comply with ISO9001 quality assurance standards.

All prices exclude VAT and delivery
Part No: SC1I

Polished Aluminium Finish £385.00

Powder Coated Black £20.00

View Basket

Ford Intercooler



Ford S-Max Intercooler

Lightweight 60mm high performance alloy core, fully louvered external fin with fitted low pressure drop internal fin. Over 40% more efficient recovery rate than bar and plate coolers. This cooler benefits from having the same core type as our Focus ST250 but in a 60mm version. Alicool Intercooler cores are vacuum braised in a controlled atmosphere to comply with ISO9001 quality assurance standards.

All prices exclude VAT and delivery
Part No: M1I

Polished Aluminium Finish £462.00

Powder Coated Black £20.00

View Basket

Ford Intercooler



Ford RS MK3 2016 Intercooler " The Behemoth "

This truly is a motorsport intercooler, lightweight high performance intercooler core, hand crafted end tanks, specially developed 120mm deep core. Dyno report shown in photos done at Pumabuild in the UK, car had there map and scorpion exhaust, previous to Alicool intercooler fitment car was maxing out at 370bhp. Intercooler takes just over an hour to fit and retains all original plastics to car no alterations necessary, once fitted car was re-run bhp figure leaped to 387. This core type unlike bar and plate has a massive recovery rate this translates to on road use as foot of pedal immediate release of heat so when you re-apply you have max power available.

For Pumabuild dyno report click here

All prices exclude VAT and delivery
Part No: Behemoth

Polished Aluminium Finish £517.00

Powder Coated Black £20.00

View Basket


Please do not hesitate to contact us if you have any questions regarding your requirements. Full details on our contact page.